Hydraulic system coil strrips slitting line FJ-3X1250-1500
Thickness of coiled plate: 0.2-3mm;
Width of coiled plate: 200-1250mm;
Precision of slitting : 0.02mm;
apply for carbon steel
I. Technical parameter
Material of processible coiled plate: apply for carbon steel plate 450Mpa;Thickness of coiled plate 0.2—3mm; Width of coiled plate slitting 1250mm;Precision of slitting width tolerance: ±0.02mm;Slitting speed 0—30m/min ;Loading capacity of uncoiler machine(feeding machine) 5-15T;Coil I.D 450-510mmmm; Coil O.D 900-1000mm;Knife pivot diameter of slitting 120mm; material 40Cr;Slitting blade 120×220×15; 10pcsMaterial of slitting blade 9CrSi;Hardness of blade HRC58°—60°;Recoiler I.D 508mm;Power 380V three-phase electricity 50Hz;Composed DevicesCoil up-given carrier -Hydraulic charging wagon loading capacity of 15TThis wagon is used for the movements and lifting of rolling plates.
Uncoiler -Hydraulic discharging machine loading capacity of 15 TThis is composed of bottom stand(guiding track pattern), frame, conical discharging tray, hydraulic pushing machine, etc.
3. Guiding (peer to peer) device
This is composed of worktable frame, guiding pole, adjustment device, moveable plane plate, etc.
4. Slitting machine
Power part This is composed of power-stand, 400decelerator, motor:15KW, gear distributing case, coupler, spindle, connecting-cover, etc.
Host machine This is composed of bottom-stand, fixed torii,, knife pivot(φ120mm, 2pcs), knife pivot lifting and pressing down adjustment device, accompany of blade, separating cover, rubber band.
5. Waste selvage device
This is composed of frame, waste selvage axle, waste selvage tray, friction wheel, accompany of strap wheel,strap
6. Damping device for preliminary dividing& pressing
This is composed of frame, preliminary dividing axe, torii, pressing axe, damping device, lifting and pressing device for pressing axe, pressing frame, dividing axe, accompany of dividing slice, separating cover, etc.
7. Recoiler
This is composed of frame, big bearing-stand, recoiling axle, recoiling expansion device, expansion recoiling plate, moveable supporting arm, accompany of decelerator, direct-current speed adjustable motor: 45KW and direct-current electronic cabinet, etc.
8. Hydraulic unloading car loading capacity of 15 T
This car is used for dividing and coiling material, vertical and horizontal movement.
III other terms
1. Quotation: US$ 55000-60000 EXW2. payment terms: deposit 30% with the contract ,the balance deposit before the shipment.
3.spare parts: the one set of knife ,and some sealed loops . one manual book in English .
4. Foundation project for the equipment
5. foundation plan of the equipment will be offered to the buyer in 60days after contract to be signed
6. The installing and supervision of the foundation project will be covered by the buyer.
7. All the basic parts should keep sockets for footing’s fixing.
8. After finishing installing, the work of cement filling into the foundation area should be covered by the buyer.
9. We supply 10 pieces of slitting blade with the slitting machine, if need more the price will be USD100 /piece.
Hydraulic system control slitting line FJ-3X1250
Uncoiler
Slitter
Tension stood
Recoiler
Production other productions :
Manual slitting line FJ-3x500-1250
Manual slitting and cut ro length line FJ-3x500-1250
Manual slitting line FJ-2x500
High speed automatic slitting line ZJX-3x1250-160