Wuxi Bangzhou Machinery Manufacturing Co., Ltd.

Full automatic high speed straightening and cut to length line

Full automatic high speed straightening and cut to length line
Product Detailed

1.Convenience operate with 2 worker and 1technician.
2.Advanced control system made high efficiency.
3.Improve the utilization

 High speed Straightening & Cut to Length Line

I.                   Technical ParameterThickness of coiled plate   0.2—3mm Aluminum steel plate ;Width of coiled plate    500—1600mm;Coil I.D              205mm;Coil E.D               1100mm;Weight of coiled plate   5T;Width of cut to length   1600mm;Precision of leveling  length tolerance  ±0.5mm/2000mmdiagonal tolerance  ±1mm/2000mm;unevenness is according to GB stipulationsCut to length       1000-1050mm;Material of leveling roller    GCr15Diameter of leveling roller   40mmDistance of leveling roller    42mmQuantity of leveling roller     19+2Hardness of leveling roller surface    HRC56°—60°;Leveling speed      0—100m/min.LINE length  2600mm.

 

V-shaped stacking table  2 pcsHydraulic charging wagon     loading capacity of0 5T

    up and down controled by hydraulic pressure; the moving by motor speed reducer( 1.1KW decelerating motor).

    With the level of mobile functionality and lifting up and down movements functionality, Used to cover the hole of coil into the Uncoil reel.

Hydraulic uncoiler

    Arc-panel’s work controled by hydraulic pressure ; uncoiler automatic with its work(40N.M motor).

Straightening machine

Power part: This is composed of power-stand, decelerator, direct-current speed adjustable motor: 11KW, Eurotherm electric cabinet, motor wheel, coupler, power distributing case, universal cross joint, 17+2groups of spindle and connect cover, etc.

Host machine: This is composed of bottom-stand, frame, under-axle stand, sliding axle stand, 11pcs of leveling roller(roller diameterφ40mm),upper pressing frame, up and down supporting wheel stand, supporting wheel, mechanically lifting &pressing device, accompany of two motors: 1.1KW

Hopper Looper

Automatic control of stockpile material, match the unit before and after the speed.

Guiding machine

This is composed of worktable frame, guiding pole, adjustment device,  moveable plane plate and clutch with multiroller, etc.

Pinch Cut to length machine

0.25×1050mm hydraulic pendulum cut to length machine. the blade length is 1050mm.

Transportation table

Belt conveying mechanism, motor 2.2Kw, adjustable speed

Stacking device

Automatic code homogeneous sheet, the output

Hydraulic system

This is composed of hydraulic station, pipe, tie-in, etc.

Electrical control system

Servo-control system, man-machine interface, etc.

III  other terms1. Quotation  USD 106,000  EXW

  Full auto straightening/levelling and cut to length line  

 

 

  Other productions :

 Simple slitting line machine

 

Hydraulic slitting line machine

High-speed slitting line machine 

 

 Thickness metal coil levelling and cut to length line machine   

Full-auto thin plate flatting/levelling/straightening and cut to length line !

What’s more, equipment can be specially designed and  manufactured according to the customer’s requirements.     



Copyright Notice @ 2008-2013 B2BAGE Limited and/or its subsidiaries and licensors. All rights reserved.